Tiltmeter Housing (2014)

Tiltmeter Housing (2014)

The Tiltmeter housing is designed to take the Tilt Box II underwater. The housing is machined out of PVC and clear cast acrylic, and features stainless steel buttons for operating the instrument. It can be safely used to a depth of 135 feet. This housing could be used...
Meteal Detector Housing (2010)

Meteal Detector Housing (2010)

This 160-foot depth housing was made for a Fisher M-101 metal detector, for use in locating metal bars embedded in concrete in an underwater tank that was being dismantled. We also made long cables so that surface support personnel could hear the same signals as the...
GoPro Intervalometer System (2014)

GoPro Intervalometer System (2014)

This GoPro Housing with Intervalometer board and LED light module attached to the top door was created as a low cost, shallow depth, effective housing for graduate research. The housings are machined out of PVC and depth rated to 30 feet. The intervalometer board...
Datalogger Housing (2010)

Datalogger Housing (2010)

This is another variant of a housing for the Licor Li_1400 datalogger. It has an underwater connector for the light sensor, a thumb trigger for taking readings, and a Lock-Line semi-rigid mount for the sensor, so that it can be deployed under reef overhangs. The...
POE Extender Housing (2011)

POE Extender Housing (2011)

This small housing serves as a junction box that contains a device to amplify and extend Power over Ethernet (PoE) cables from 100M to 200M, and multiples of these can be chained together for longer distances. The test plugs are to be replaced by the user with...